Single-Mode 1310/1550nm and mm 850nm 2X2b Fiber Optic Switch

The 2x2 Opto-Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting 2 incoming optical signals into 2 output fibers. This is achieved using a opto-mechanical configuration and activated via an electrical control signal. The switch has integrated electrical position sensors.Based on thin film filter technology that provides a robust method of altering the light patch, this series of products has a drastically simplified platform configuration offering high reliability and low production cost. This novel design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as an unmatched low cost.

Availability:

Quantity:



Inquire Add to Basket

Product Description

Features:

Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Latching and Non-latching

Application:

Sub-system Integration
Optical Network Monitoring/Protection
Route Fiber Test System
Re-configurable OADM
Test & Measurement Equipment Manufacturing Application
Network Test System

Specifications

Parameters	Unit	Value
Wavelength Range	nm	1260~1650
Operating Wavelength	nm	1310/1550
Insertion Loss	dB	Typ:0.8 Max:1.0
Return Loss	dB	≥50
Crosstalk	dB	≥55
PDL	dB	≤0.05
WDL	dB	≤0.25
TDL	dB	≤0.25
Repeatability	dB	≤±0.02
Power Supply	v	3.0 or 5.0
Lifetime	times	≥10⁷
Switch Time	ms	≤8
Transmission Power	mW	≤500
Operatin Temperature	ºC	-5~+70
Storage Temperature	ºC	-40~+85
Weight	g	16
Dimension	mm	(L)28.0×(W)12.0×(H)8.2 Customization is available

PINs

Pins Defining		Optical Route	Electricity driving				Condition Monitoring
Control model		2×2	1	5	6	10	2-3	3-4	7-8	8-9
Latching	Bar	P1-P2	--	--	GND	V+	Close	Open	Open	Close
Latching	Cross	P1-P3	V+	GND	--	--	Open	Close	Close	Open
Non-latching	Bar	P1-P2	--	--	--	--	Close	Open	Open	Close
Non-latching	Cross	P1-P3	V+	--	--	GND	Open	Close	Close	Open

Electrical

Specifications	Voltage	Current	Resistance
5V Latching	4.5~5.5	36~44mA	125Ω
5V Non-latching	4.5~5.5	26~32mA	175Ω
3V Latching	2.7~3.3	54~66mA	50Ω
3V Non-latching	2.7~3.3	39~47mA	70Ω

Ordering Information

Mode	Wavelength	Voltage Type	Control Model	Fiber Type	Fiber Diameter	Fiber Length	Connector
S=SM M=MM	85=850nm 13/15=1310/1550nm X=Others	3=3V 5=5V	L=Latching N=Non- Latching	5=50/125 6=62.5/125 9=9/125 X=Others	25=250um 90=900um 20=2.0mm 30=3.0mm X=Others	1=1m 2=1.5m X=Others	00=None FP=FC/PC FA=FC/APC SP=SC/PC SA=SC/APC STP=ST/PC STA=ST/APC LP=LC/PC LA=LP/APC X=Others

Hot Products

AWG DWDM

PM Patch Cord

Single-Mode 1310/1550nm and mm 850nm 2X2b Fiber Optic Switch

Features:

Application:

Features:

Application:

Hot Products

New lab eastablish with University

800nm fiber production

What can we do?