Tel:
+86-521-57873993
Availability: | |
---|---|
Quantity: | |
Parameters/Test conditions | Min | Typ | Max | Unit | Note | ||
1 | Operating Wavelength | 800 | 2000 | nm | |||
2 | Stripping Efficiency * | x/125 DCF, x=6, 10, 15, 20, etc. PM or non-PM fiber | 20 | dB | PM or non-PM fiber | ||
3 | x/250 DCF, x=25, 30, etc. PM or non-PM fiber | 20 | dB | ||||
4 | x/400 DCF, x=20, 43, etc. PM or non-PM fiber | 17 | dB | ||||
5 | Signal Insertion Loss | 0.2 | 0.3 | dB | |||
6 | Signal Output Beam M 2 | 1.2 | - | Depending on input signal | |||
7 | Polarization Extinction Ratio | 17 | dB | For PM fiber only | |||
8 | Fiber Length | 0.8 | m | ||||
9 | Power Handling | Refer to the below table of Max. Stripped Power of Different Packages | power stripped from inner cladding. | ||||
10 | Operating Temperature | -5 | +70 | o C | |||
11 | Operating Humidity | 5 | 95 | %RH | Not recommended under high humidity. | ||
12 | Storage Temperature | -40 | +85 | o C | |||
13 | Package | C4, C7, H2 | - | Refer to drawing. |
Parameters/Test conditions | Min | Typ | Max | Unit | Note | ||
1 | Operating Wavelength | 800 | 2000 | nm | |||
2 | Stripping Efficiency * | x/125 DCF, x=6, 10, 15, 20, etc. PM or non-PM fiber | 20 | dB | PM or non-PM fiber | ||
3 | x/250 DCF, x=25, 30, etc. PM or non-PM fiber | 20 | dB | ||||
4 | x/400 DCF, x=20, 43, etc. PM or non-PM fiber | 17 | dB | ||||
5 | Signal Insertion Loss | 0.2 | 0.3 | dB | |||
6 | Signal Output Beam M 2 | 1.2 | - | Depending on input signal | |||
7 | Polarization Extinction Ratio | 17 | dB | For PM fiber only | |||
8 | Fiber Length | 0.8 | m | ||||
9 | Power Handling | Refer to the below table of Max. Stripped Power of Different Packages | power stripped from inner cladding. | ||||
10 | Operating Temperature | -5 | +70 | o C | |||
11 | Operating Humidity | 5 | 95 | %RH | Not recommended under high humidity. | ||
12 | Storage Temperature | -40 | +85 | o C | |||
13 | Package | C4, C7, H2 | - | Refer to drawing. |