Tel:
+86-521-57873993
 |
| Quantity: | |
|---|---|
2. Features
High lsolation
Low lnsertion Loss
High stability and reliability
3. Applications
Fiber Lasers
Optical transmitters&Transceivers
Fiber Amplifiers&Fiber Sensors
4. Specification
| Parameters | Unit | Values |
| Central Wavelength | nm | 1064 |
| Operating Wavelength Range | nm | ±15 |
| Typ. Peak Isolation | dB | 35 |
| Min. Isolation in Band (at 25ºC) | dB | 30 |
| Typ. Insertion Loss | dB | 0.8 |
| Max. Insertion Loss (at 25ºC) | dB | 1.2 |
| Max. PDL(for SM fiber) | dB | 0.15 |
| Min. Extinction Ratio(for PM fiber) | dB | 18(Type B), 20(Type F) |
| Min. Return Loss | dB | 45 |
| Maximum Power Handling (continuous wave) | W | 0.5,1, 2, 5,10 |
| Max. Peak Power for ns Pulse | kW | 1, 5,10 |
| Max. Tensile Load | N | 5 |
| Fiber Type | - | HI1060, PM980 fiber, 10/125 SC,PM1060L or other |
| Operating Temperature | °C | 0 ~ + 70 |
| Storage Temperature | °C | -40 ~ +85 |
1.Above specification are for device without connector, and may change without notice.
2.IL is 0.3 dB higher and RL is 5 dB lower,ER is 2dB lower(PM type) for each connector added.
3.The pass optical power is 2 W only for connector added.
4.Type B: Both axis working, Type F: Fast axis blocked, the default is Type B if without request.(Only for PM type)
5. Ordering lnformation
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| wavelength | Optical Power | Power Type | Fiber Type | Pigtails Diameter | Fiber Length | Connector Type |
| 85:850nm 98:980nm 30:1030nm 64:1064nm 80:1080nm XX: Other | L:<0.5W 1:1W 3:3W 5:5W 10:10W | P:Pulsed C:Continuous Wave | XX/XX/XX/XX(core/clad/core NA/clad NA) | 25:250μm bare fiber 90:900μm Loose Fiber XX: Others | 10:1.0m XX: Other | 00:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC XX: Others |
f you need to customize other specifications, please provide detailed description for your requirement.
2. Features
High lsolation
Low lnsertion Loss
High stability and reliability
3. Applications
Fiber Lasers
Optical transmitters&Transceivers
Fiber Amplifiers&Fiber Sensors
4. Specification
| Parameters | Unit | Values |
| Central Wavelength | nm | 1064 |
| Operating Wavelength Range | nm | ±15 |
| Typ. Peak Isolation | dB | 35 |
| Min. Isolation in Band (at 25ºC) | dB | 30 |
| Typ. Insertion Loss | dB | 0.8 |
| Max. Insertion Loss (at 25ºC) | dB | 1.2 |
| Max. PDL(for SM fiber) | dB | 0.15 |
| Min. Extinction Ratio(for PM fiber) | dB | 18(Type B), 20(Type F) |
| Min. Return Loss | dB | 45 |
| Maximum Power Handling (continuous wave) | W | 0.5,1, 2, 5,10 |
| Max. Peak Power for ns Pulse | kW | 1, 5,10 |
| Max. Tensile Load | N | 5 |
| Fiber Type | - | HI1060, PM980 fiber, 10/125 SC,PM1060L or other |
| Operating Temperature | °C | 0 ~ + 70 |
| Storage Temperature | °C | -40 ~ +85 |
1.Above specification are for device without connector, and may change without notice.
2.IL is 0.3 dB higher and RL is 5 dB lower,ER is 2dB lower(PM type) for each connector added.
3.The pass optical power is 2 W only for connector added.
4.Type B: Both axis working, Type F: Fast axis blocked, the default is Type B if without request.(Only for PM type)
5. Ordering lnformation
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| wavelength | Optical Power | Power Type | Fiber Type | Pigtails Diameter | Fiber Length | Connector Type |
| 85:850nm 98:980nm 30:1030nm 64:1064nm 80:1080nm XX: Other | L:<0.5W 1:1W 3:3W 5:5W 10:10W | P:Pulsed C:Continuous Wave | XX/XX/XX/XX(core/clad/core NA/clad NA) | 25:250μm bare fiber 90:900μm Loose Fiber XX: Others | 10:1.0m XX: Other | 00:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC XX: Others |
f you need to customize other specifications, please provide detailed description for your requirement.
